Principal research scientist at National Physical Laboratory, technical lead for emission and carbon measurement scientific area. Long history of working in standardisation, Former Chairman and Quality officer of STA, involved in developing uk methods eg instrumental SO2, Vice Chair of CEN air quality technical committee, Chairman of UK mirror BSI group, EH 2/1, and convenor of CEN flow and data quality (EN14181) working groups.
David Graham is an Environmental Engineer with Uniper Technologies, working at their Technology Centre near Nottingham, England. He provides technical support in relation to CEMs, emissions reporting and compliance issues for all plant types to the whole of the UK power industry. David chairs or is a member of various relevant groups within the European power sector and the Source Testing Association and is involved in standards development. Before joining Uniper, David was a gas turbine combustion engineer with Alstom for six years and, prior to that, he worked on various aspects of combustion and environmental science with British Gas. David holds a degree in Chemical Engineering, is a Fellow of the Institution of Chemical Engineers and is an Associate of the Institute of Environmental Management & Assessment (AIEMA).
Robert has held both production and engineering positions in the fertilizer industry as well as the hazardous waste incineration industry prior to co-founding B3 Systems, Inc. Since it's inception in 1991, B3 Systems has focused on providing key support functions to the emission testing and monitoring markets.
Sanjeev K. Kanchan is a known environmental expert and consultant who has contributed in the development of various regulatory tools including Critically Polluted Areas, real time pollution monitoring systems, and new pollution norms for industrial sectors in India. In his areas of expertise including- resource efficiency, pollution monitoring and control technology, best practices and technology, life cycle assessment, policies, regulations and compliance etc., Sanjeev has closely worked with various government institutions, industries, leading think tanks, research institutions and civil societies in India and overseas and trained hundreds of representatives.
Currently, he is an Adviser to the Council on Energy, Environment and Water (CEEW, India) and associated with International Centre to Sustainable Carbon (ICSC, UK), UNEP’s Global Mercury Partnership and International Centre for Environment Audit and Sustainable Development (iCED, Govt. of India). Previously, he has managed senior level roles in CEM technology supplier company, data service provider and environmental testing company besides over a decade into environmental research and advocacy organization. In the past, he has also been a member of the PM-ETS Market Oversight Committee (Govt. of Gujarat) and the Management Systems Certification Scheme Committee of BIS, India.
He has published a number of books and research reports on resource efficiency and performance benchmarking of major industrial sectors. On CEMS, his books- “CEMS- A Technical Guidance Manual”, “CEMS and CEQMS implementation in India: Inspection Manual” and “Status of implementation of Continuous Emission Monitoring System in Coal-fired Thermal Power Plants in India” etc. are well known. Sanjeev also writes research articles and blogs for various science magazines, research journals and print and online media platforms for advocacy.
Dr Roger Brown FRSC is the Managing Director of Oakwood Environmental Services, an emissions and environmental consultancy.
Dr Brown has been actively involved in consultancy and all aspects of source emission and ambient air testing for over 30 years. As a director of several blue-chip companies, he developed their emission test services. He currently provides consultancy to some of the world’s largest companies and holds patents for the measurement of various novel species and processes. He has also designed and commissioned state-of-the-art mobile laboratories for regulatory purposes and process optimisation. He has authored numerous papers and chapters in key works on the measurement of pollutants. He graduated from Southampton University with a doctorate in chemistry and conducted postdoctoral research into mass spectrometry and dioxin analysis. He is currently a director of the Source Testing Association and was a past Chairman, having been involved in the association for 26 years.
Stephen B. Harrison is the founder and managing director at sbh4 GmbH in Germany. His work focuses on decarbonisation, greenhouse gas emissions and atmospheric pollution control. CEM and gas analysis are fundamental pillars of his consulting work.
With a background in specialty gases (for calibration and operation of CEM equipment), including 27 years at BOC Gases, The BOC Group and Linde Gas, Stephen has intimate knowledge of CEM systems in a broad range of industry sectors from operational, technical and regulatory perspectives.
Stephen has extensive buy-side and sell-side M&A due diligence and investment advisory experience in the gas analysis instrumentation and clean-tech sectors. Private Equity firms and investment fund managers and green-tech start-ups are regular clients.
Karl R. Wilber has over 40 years of power and process industry consulting, testing and management experience. Additionally, he has served as General Manager of multiple companies in the air pollution control equipment and balance of plant areas. He is currently General Manager of Tekran Instruments Corporation, supplier of technology and services directed at trace-level mercury analyses and monitoring.
Mr. Wilber holds Master's Degree in Engineering Science and Mechanics and is a licensed Professional Engineer. He has been an expert witness in over 15 cases having to do with environmental and contractual performance and compliance.
Jeff is a Senior Scientist with EPA’s Office of Research and Development where he has been doing fundamental and applied combustion, incineration and emissions control technology research and emissions measurements for nearly 40 years. Jeff’s research focuses primarily on emissions measurement methods development research. Jeff has contributed to a multitude of EPA’s formal and informal methods including those found in 40 CFR Part 60 and SW-846. Currently, Jeff is ORD’s lead to develop PFAS emissions test methods.
Tuula is principal scientist at VTT Technical Research Centre of Finland. Her background is in emission measurements and especially on their quality assurance (QA) and quality control (QC). She has been involved in standardisation work by European Standardisation Organisation CEN/TC264 for several years, being member of several working groups of CEN/TC264 and also the chairman of Finnish mirror group for CEN/TC264. Tuula has been the project manager for several capacity building projects focusing on the improvement of emission measurement capacities in countries like Chile, India, Uruguay and Baltic countries. She has contributed to several Finnish guidelines for the implementation of quality assurance procedures for emission measurements, such as Handbook for emission measurements. She has also been responsible for organising ILC (interlaboratory comparisons) for Finnish stack testing teams.
Lighea is an environmental engineer with extensive experience in EU law and academic background focused on appropriate technologies for Developing Countries. Throughout her years in Brussels, she was the point of contact between stakeholders, institutions and Member States, interacting with public and private organisations on a national, European and global scale. She deals with projects linked to sustainable development, e.g. on zero pollution and chemicals, industrial emissions and BATs, circular economy and recycling targets, plastic waste and chemical recycling, sustainable finance and taxonomy. Her 10-year experience with BREF and industrial emissions gives her an comprehensive understanding on matters of industrial performances related to energy and resource efficiency, emission monitoring and measurement uncertainty, abatement techniques, cross-media effects and decarbonisation pathways. She followed a number of different projects including reviews of technological options for waste treatment, feasibility analysis for different technologies based on TRL and impact categories and developing of industrial management and compliance plans within the framework on Best Available Techniques;
Jordi Puig is a Physicist in Generalitat de Catalunya the competent Authority of one of the most industrialized region of Spain. He is in charge assuring CEMS data quality procedures and legislation fulfilment from plants that range large combustion plants, waste incinerators, petrol refinery plants and cement kilns to medium combustion plants or Solvent user industry.
He is in charge of adapting national standardization on CEMs quality Assurance, Data acquisition and Treatment, and data transmission to check the fulfilment of IED and MID.
Since 2009 Jordi is a member of the Spanish Standardization Association in the Air Quality Committee. On 2011 he started as member of the European Standardization Committee in CEN/TC 264 in WG 9. He has actively participated in EN 14181:2014 and the series of DAHS Standards 17255 mainly focusing on the final usability of CEMs and DAHS data to adapt to Directives specifications and needs.
Holding a MSc in Meteorology from Barcelona's University Physicist faculty he has formerly hold positions on air quality improvement, urban pollution mitigation and emissions inventories calculation in Oesia group and positions on wind turbines micro sitting an operational control in Alstom Power.
I am a chemical Engineer who graduated from ENSCR with Master of Science in analytical chemistry in 2002. After working for three years for Corus RD&T (Steel industry) in the UK as Project leader in analysis of Organic pollutants from air emissions, I joined Ineris in France in 2005. From 2005 to 2017 I worked in the area of emissions of gases and aerosols from various industrial and domestic combustion processes, in charge of research project at national and European levels. Since 2018 I am the head of the Ineris team dealing with atmospheric an aqueous emissions.